The cleanroom specialist wholesaler abovo offers a large selection of cleanroom wipes.

And this wide range of cleanroom wipes is important, because the selection of the right cleanroom wipe influences the performance of the cleanroom.

In the following article, we briefly introduce the abovo cleanroom wipes range, explain why the choice of cleanroom wipes affects performance in the cleanroom, present the various selection criteria for cleanroom wipes and give tips on the correct folding and wiping technique.

THE MOST IMPORTANT THING IN BRIEF:
  • A large selection of cleanroom wipes is important in order to find the right cleanroom wipe for the respective application.
  • The choice of cleanroom wipe has an influence on cleanroom performance, both in terms of cleaning efficiency and particle release.
  • There are a variety of selection criteria for cleanroom wipes, including edge type, format, material, cleanroom class, cleanliness level, absorbency, wetting rate, chemical compatibility testing, non-volatile residue (NVR), ionic contamination, size and packaging.
  • Even the best cleanroom wipe is useless if it is not used correctly, i.e. if the correct folding and wiping technique is not observed.

Table of contents

Cleanroom wipes from abovo

Cleanroom wipes are one of the most important controlled consumables in the cleanroom. Cleanroom wipes are used in cleanrooms to clean objects such as work surfaces on cleanroom furniture, but also products that are manufactured in the cleanroom.

The aim of cleanroom wipes is to release as few particles as possible so as not to contaminate the cleanroom. At the same time, however, cleanroom wipes should have the highest possible cleaning effect.

There are a variety of different cleanroom wipes, each of which is suitable for different applications. A distinction is made between the following cleanroom wipes, among others:

  • Dry cleanroom wipes
  • Pre-soaked or pre-moistened cleanroom wipes
  • Sterile cleanroom wipes
  • antistatic cleanroom wipes
  • Disposable cleanroom wipes
  • Reusable cleanroom wipes

There are also many other distinguishing criteria – such as the material used or the recommended cleanroom class – that play a role in selecting the right cleanroom wipe. We go into these other selection criteria in more detail in the section “What should you consider when selecting cleanroom wipes?”.

In the abovo online shop you can buy cleanroom wipes in many different designs and sizes. From the CELOS brand alone,abovo offers over ten different cleanroom wipes (“CELOS Wiper”). In addition, abovo has cleanroom wipes from over 30 other brands in its range, including AlphaLite, AlphaWipe, Berkshire, Chemoprotect, Clear & Clean, Codan, Contec, Drytech, Kimtech, MiracleWipe, PolySat, TechniSat, Texwipe, Vertex and more.

Selection of cleanroom wipes influences performance in the cleanroom

Choosing the right cleanroom wipe is so important because it affects performance in the cleanroom. This is because a cleanroom wipe determines what is removed from the surface and what remains behind, such as fibers from the cleanroom wipe itself.

Cleanroom wipes with sealed edges, for example, release fewer fibers than cleanroom wipes with unsealed cut edges.

In terms of wiping performance, pre-moistened cleanroom wipes have the advantage that they release a controlled amount of cleaning agent or solvent.

There are frequently occurring errors when using cleanroom wipes:

  • Use of cleanroom wipes with unsealed cut edges, although particularly high ISO requirements apply, for which a reduction in fiber release would be necessary
  • Excessive moistening of dry cleanroom cloths, which only spreads the contamination on the surfaces or leaves too much residue behind
  • Non-observance of extractable substances in connection with sensitive components
  • Mixing cleanroom wipes and all-purpose wipes in the same workflow

What should you consider when selecting cleanroom wipes?

When selecting cleanroom wipes, you should consider a number of selection criteria to ensure that you find the right cleanroom wipe for the application in question.

These selection criteria when purchasing cleanroom wipes include the following, which we will discuss in more detail in the following sections:

  • Edge type
  • Format
  • Material
  • Cleanroom class
  • Degree of cleanliness
  • Absorbency
  • Wetting rate
  • Chemical compatibility test
  • Non-volatile residues (NVR)
  • Ion contamination
  • Size
  • Packaging

Edge type

A distinction is made between sealed edges and non-sealed edges. The latter are also known as cut edges. In the case of sealed edges, a distinction is made between different types of sealing, including laser-sealed, ultrasonically sealed and heat-sealed.

The laser and ultrasonically sealed cleanroom wipes reduce loose fibers and are used in particular for applications in ISO classes 3-5 (although it is always necessary to check the specific cleanroom wipe to see which cleanroom class it is recommended for). The heat-sealed cleanroom wipes generally guarantee controlled edge stability and are suitable for regulated production processes (although here, too, it is always necessary to check the specific cleanroom wipe to see which requirements it meets).

Format

The cleanroom wipe format is divided into dry cleanroom wipes, pre-soaked cleanroom wipes (often with 70% isopropyl alcohol, or IPA for short) and sterile cleanroom wipes.

The advantage of dry cleanroom wipes is that you can choose the cleaning agent or solvent yourself. The disadvantage is that the liquid is usually not applied evenly, but is sometimes wiped too wet and sometimes too damp. In this respect, pre-soaked cleanroom wipes are advantageous, as the amount of liquid they contain is always the same, which makes it possible to repeat the same cleaning processes. In addition, pre-moistened cleaning cloths do not require spray bottles to apply the cleaning agent, which prevents aerosol formation in the cleanroom.

Material

Cleanroom wipes also differ in terms of material. Cleanroom wipes are available in the following materials in particular:

  • Knitted polyester (continuous filament): abrasion-resistant, chemically stable, durable, low particle emission; sealed polyester cleanroom wipes are generally suitable for ISO classes 3-5 (to be checked with the specific product)
  • Cellulose/polyester blended nonwoven: high absorbency and fast wetting; cost-efficient, but higher particle release possible due to the cellulose, therefore more suitable for ISO class 6-8 (to be checked with the specific product)
  • Polypropylene nonwoven: high chemical resistance and therefore often used to absorb aggressive solvents or acids (to be checked with the specific product)
  • Microfiber: high absorption capacity of even the smallest particles; ideal for use on scratch-sensitive surfaces, for optics or for streak-free cleaning of stainless steel (to be checked with the specific product)

Cleanroom class

There are two systems for cleanroom classes: the GMP system and the ISO system. If the ISO system is used, the classes can be roughly grouped into the following areas: ISO 3-5 for critical environments and ISO 6-8 for support areas.

Degree of cleanliness

In connection with cleanrooms, a distinction is also made between different levels of cleanliness, for each of which different cleanroom wipes are suitable:

  • Routine cleanliness
  • Critical cleanliness
  • Validated cleanliness (compliance with measurable acceptance criteria, for example through TOC or HPLC analyses)

Absorbency

Another selection criterion for cleanroom wipes is absorbency. This expresses the efficiency in removing spills.

Wetting rate

The wetting rate of cleanroom wipes provides information about the uniformity of the application of liquids.

Chemical compatibility test

As part of the chemical compatibility test, it is necessary to clarify whether the respective cleanroom wipe is sufficiently resistant to the solvent or disinfectant to be used.

Non-volatile residues (NVR)

Another cleanroom wipe selection criterion is the extent to which non-volatile residues (NVR), for example from solvents, remain after cleaning. Such residues can become a problem during bonding or coating processes, for example.

Ion contamination

In the semiconductor, microelectronics and optics industries in particular, contamination with ions such as sodium, potassium or chloride must be avoided, which is why a cleanroom wipe is required to reduce or prevent such ion contamination.

Size

Cleanroom wipes are available in different sizes, such as 4″ x 4″, 6″ x 6″, 9″ x 9″, 12″ x 12″, 18″ x 18″. This is also a selection criterion.

Packaging

Finally, the packaging can also be important when choosing the right cleanroom wipe. A distinction is made between bulk stacks, stacked packaging, bags, double bags and gamma-irradiated packaging.

Especially for the CELOS Wiper cleanroom wipes, we have created an overview table to help you select the right cleanroom wipe for your application.

Observe the correct folding and wiping technique

However, the best cleanroom wipe cannot work properly if it is used incorrectly. Cleanroom wipes require a special folding and wiping technique to ensure that they are used efficiently and effectively.

The following general tips can be given on folding and wiping techniques:

  • Use a uniform folding technique for more control
  • Swipe in one direction only
  • Regulate humidity
  • Do not pull edges over critical surfaces
  • Change the cleanroom cloth in good time

You can find more detailed information on the correct folding and wiping technique in our article “Using cleanroom wipes correctly – instructions on folding and wiping technique“.

Advice on cleanroom wipes

We at cleanroom wholesaler abovo will be happy to help you select the right cleanroom wipes for your application.

The easiest way to contact our cleanroom wipe experts at abovo is by telephone or e-mail:

  • Telephone : +41 32 552 44 44
  • E-mail: info@abovo.ch

If you contact us by e-mail, we will reply as quickly as possible.

Frequently asked questions (FAQs) about “Cleanroom wipes”