LOCTITE Diaphragm Valve

LOCTITE diaphragm valves are pneumatically operated dispensing valves with a floating PTFE diaphragm. The valves are suitable for stationary use or manual pressure/time dispensing. They are not suitable for cyanoacrylate products. The diaphragm valve with a 2 mm opening is suitable for low-viscosity anaerobic products (up to 2,500 mPa·s). The diaphragm valve with a 3 mm opening is suitable for low- to medium-viscosity anaerobic and thixotropic products (2,500 to 5,000 mPa·s).

Pneumatically operated dispensing valves for anaerobic and acrylic adhesives

- Cost-effective solution for use with pressure/time systems.
- Modular design and floating diaphragm for easy valve cleaning and repair.
- Fail-safe spring closure in the event of a compressed air supply failure.
- Internal PTFE components to prevent adhesive curing.
- Increased flow rates when using a 3/8" product feed tube.
- Scope of delivery: (1) diaphragm valve, (1) 6.35 mm (0.25 inch) product feed tube, (1) dispensing needle set, (1) operating manual.red for operation: (1) valve, (1) integrated dispenser

Check details