The adhesive and sealant remover LOCTITE SF 7200 from Henkel is used as a component cleaner, for example to facilitate the removal of hardened surface sealants on metal flanges.

In the following article, we explain the possible applications of the adhesive and sealant remover LOCTITE SF 7200, present its properties and advantages and give instructions for the use of the product.

Use of LOCTITE SF 7200 adhesive and sealant remover

The adhesive and sealant remover LOCTITE SF 7200 can facilitate the removal of cured chemical surface sealants from metal parts. For this purpose, the sealing material on the respective surfaces, such as metal flanges, is softened by the applied LOCTITE SF 7200 adhesive and sealant remover. The advantage of this method is that damage caused by forcible scraping can be prevented in this way, especially on soft metal flanges such as those made of aluminum.

The manufacturer Henkel expressly points out that the adhesive and sealant remover LOCTITE SF 7200 is intended for use on metals and application on plastics is not recommended.

The LOCTITE SF 7200 adhesive and sealant remover is applied using a spray can, which creates a foamy layer on the surface to be softened. The foamy structure prevents the applied adhesive and sealant remover from running off, even on vertical surfaces. This allows the product sufficient time to act on the sealing material.

The LOCTITE SF 7200 adhesive and sealant remover can also facilitate the removal of the following materials, in addition to sealants:

  • Adhesives
  • Encrusted grease or oil residues
  • Soot deposits
  • Dried oils, paints, varnishes

The adhesive and sealant remover LOCTITE SF 7200 is characterized by the following properties (see also technical data sheet):

  • Applications: Cleaning of components (intended for use on metals; application on plastics not recommended)
  • Technology: solvent-based
  • Chemical basis: Mixture of aliphatic glycol ethers, hydrocarbons, surfactants and methyl ethyl ketones
  • Appearance: amber-colored, liquid
  • Solubility in water: not miscible
  • Solubility in solvents: miscible
  • Propellant: Propane
  • Shipping: not frozen, at room temperature
  • Shelf life: 1095 days
  • Spray function: Dual Spray
  • Content quantity: 400 ml

Here you can order the LOCTITE SF 7200 adhesive and sealant remover from the abovo online store.

Advantages of LOCTITE SF 7200 sealant and adhesive remover

The adhesive and sealant remover LOCTITE SF 7200 is characterized by various advantages:

  • easy to apply with spray can
  • Does not run off even on vertical surfaces
  • Removes surface sealants within 10 to 15 minutes
  • Removes hardened sealants and solid seals
  • Reduces scraping to a minimum
  • CFC-free

Instructions for use of LOCTITE SF 7200 adhesive and sealant remover

When using LOCTITE SF 7200 adhesive and sealant remover, the following instructions for use from the manufacturer Henkel must be observed:

  1. As LOCTITE SF 7200 may attack paintwork, any painted surfaces should be carefully protected from the spray mist before using this adhesive and sealant remover.
  2. Spray can should be held vertically 20 to 30 cm away from the affected surface and sprayed onto the flange or surface. The thicker the application, the better.
  3. The application should be left to work for 10 to 15 minutes; silicone seals should be left to work for 30 minutes.
  4. The seal should be removed with a soft scraper and the flange or surface should be wiped clean. If necessary, repeat the process.
  5. Before applying a new gasket material to the surface or flange, it is essential to clean it with a suitable solvent, such as LOCTITE SF 7063.

The following video clearly explains how to use the LOCTITE SF 7200 adhesive and sealant remover :

Please also read our article on “Loctite overview for download: Loctite repair expert pocket book“.

Advice on adhesive and sealant remover

If you would like more information about theLOCTITE SF 7200 adhesive and sealant remover , simply contact our Henkel experts at abovo. We at abovo will be happy to advise you competently, because abovo has been an authorized distributor of Henkel Adhesive Technologies products for over 15 years; initially in the Henkel Electronics division and since 2022 also in the Henkel Industry division.

The best way to contact the Henkel-Loctite experts at abovo is by telephone or e-mail:

  • Telephone number: +41 32 552 44 44
  • E-mail: info@abovo.ch

Products from abovo in this article

LOCTITE SF 7200
LOCTITE SF 7200